High quality Wood chipper machine

With the development of the high quality wood chipper machine industry, it has gained popularity among many users. However, under long-term operating conditions, the equipment is prone to minor malfunctions. Taking overload operation as an example, due to the high speed and heavy load of the cutting equipment, the wood is different. The load fluctuates greatly, and the load of the circuit breaker should be detected in a timely manner. So how to determine if the high quality wood chipper machine equipment is overloaded? The following points are for reference only:

1. Weigh the conveying capacity of the feeding belt conveyor of the cutting machine using a belt scale or other equipment.
2. The material level in the chip cavity is directly indicated by a contact level gauge, which indicates its load.
3. It is obtained by calculating the cyclic load of the closed-loop screening system of the slicer.
4. Check the current value in the circuit of the high quality wood chipper machine motor. The current during equipment operation is usually controlled at around 85% of the additional current.
5. In the multi-stage slicing process, it is usually only necessary to detect the load of the slicer in the later stage of controlling the product granularity. The high quality wood chipper machine is usually in a closed-loop system, and its feed rate includes early quantity and cyclic load.
The above is the relevant knowledge about how to determine the overload of the high quality wood chipper machine. To reduce the failure rate of the high quality wood chipper machine, a scientific and reasonable operation method is needed. After a malfunction occurs, it is necessary to carry out maintenance work, which can not only extend the service life of the equipment, but also avoid unnecessary economic losses. I hope my sharing is helpful to everyone.