Wood chipper machine for sale

Wood chipper machine machine is a specialized equipment for producing wood chips, widely used in the material preparation section of industries such as textile, papermaking, pulp making, and artificial board production processes. Before wood chipper machine for sale, we need to understand its workflow:
1、 Preparation stage

Before operation, it is necessary to carefully inspect the various components of the wood chipper machine machine, including blades, drive belts, gears, bearings, etc., to ensure that there is no damage or abnormality. At the same time, check the lubrication system to ensure that there is sufficient lubricating oil at each lubrication point to reduce wear and extend the service life of the equipment. Prepare the wood to be processed according to production requirements, ensuring that the wood is dry, free of pests and diseases, and the length meets the requirements. Operators must wear personal protective equipment such as helmets, goggles, gloves, and shoes to ensure safe operation.

2、 Start up and adjustment phase
After connecting the power, turn on the power switch and start the wood chipper machine. The chip cutting operation can only be carried out after the equipment is running normally. Adjust the blade clearance and speed of the slicer according to the thickness and size requirements of the wood. Ensure that the parameter settings are reasonable to achieve the desired chip cutting effect. Usually, the adjustment of blade clearance needs to be carried out through feeding gap adjustment organization to meet the processing requirements of different sizes of wood.
3、 Chip cutting and monitoring stage
Slowly feed the wood to be processed into the feeding port of the slicer, and the operator should stand in a safe position to avoid injury caused by improper operation. Wood is fed into the cutting tissue at a certain speed under the pressure of the feeding roller, and is cut into wood pieces by the blade. During the chip cutting process, the operator should closely observe the operation of the equipment. If any abnormalities are found (such as vibration, excessive noise, jamming, etc.), the machine should be stopped immediately for inspection and troubleshooting.
4、 Shutdown and cleaning phase
After the chip cutting is completed, turn off the power switch and stop the equipment from running. Clean up the residues inside the slicer and debris such as sawdust around the equipment to keep it clean. At the same time, check the wear of the blade. If severe wear is found, it should be replaced in a timely manner. According to the equipment manual, regularly lubricate and maintain the equipment to extend its service life.
5、 Precautions
During the operation, it is strictly prohibited to wear gloves or push materials directly with hands to prevent fingers from being crushed. It is strictly prohibited to carry out maintenance, adjustment or cleaning work during the operation of the equipment to avoid safety accidents. Operators should be familiar with the equipment operating procedures, ensure proficiency in operation, and strictly abide by labor discipline. It is strictly prohibited to operate under the influence of alcohol.
Through the above workflow, the wood chipper machine can operate safely and efficiently, cutting wood into wood chips that meet the requirements and providing raw materials for the subsequent wood processing process.