Low Cost Disc Wood Chip Machine

With the long-term use of the low cost disc wood chip machine,the blade accessories are prone to wear and tear,leading to a decrease in equipment efficiency and damage.If not resolved and handled in a timely manner,it will affect the progress of use.So how to improve the service life of the blade of the equipment slicer?Follow the editor to learn more.

The damage to the blade of the low cost disc wood chip machine mainly occurs in two situations:blade fracture and edge wear.To avoid fracture,it is necessary to improve the toughness of the blade.Improper salt bath high-temperature tempering process on the back of the blade can cause excessive hardness,which is the main reason for brittle fracture.As for improving wear resistance,the process of hard chrome plating on the cutting edge can be considered,because chromium metal has strong hardness and wear resistance characteristics.Increasing the chrome plating process will double the wear resistance and service life of the cutting edge.

The maintenance of the cutting blades of the disc wood chip machine is an important link to extend the service life of the blades and improve the processing quality.Here are some suggestions for maintaining the blades of a slicer:
1.After use,clean and dry the blade,and apply a layer of rust inhibitor to prevent the blade from rusting.
2.Regularly check the wear of the disc wood chip machine blades and replace severely worn blades in a timely manner to ensure the accuracy of the geometric shape and size of the cutting tools.
3.During use,it is important to control the cutting speed and feed rate of the chip low cost disc wood chip machine to avoid excessive cutting force.Excessive cutting force can cause the blade to easily break or wear out quickly.
4.Avoid excessively high processing temperatures,as they can have adverse effects on the material of the low cost disc wood chip machine blades and shorten their lifespan.
5.Timely clean the cutting chips and impurities on the blades to avoid unnecessary impact on the wear of the disc wood chip machine blades
Due to the widespread use of low cost disc wood chip machines in the material preparation section of industries such as textiles,papermaking,pulp making,and artificial boards,repeated use can reduce the service life of the blades.Therefore,the methods mentioned by the editor above can be tried.The blade usage of different disc wood chip machine equipment is different,and everyone must handle it according to the actual usage of the equipment.