High performance press chipper machine

Have you ever heard that the High performance press chipper machine needs to rest?I believe many people are very surprised to hear this news.It is precisely because machines do not have sufficient rest time that their lifespan is becoming shorter and shorter.If you want it to perform well,you should let it rest and conduct regular inspections and maintenance.Here are some suggestions from the editor for the maintenance and upkeep of the chipper machine.

1.After the High performance press chipper machine stops feeding,the hot air stove continues to supply hot air to the system for 20 minutes to dry the internal components of the dust collector.

2.After stopping the wind,immediately close the inlet and outlet valves of the dust collector to prevent cold air from entering,and the dust collector can be used for maintenance.
3.Check the large membrane in the pulse valve once or twice,and replace it promptly if it is damaged or aged.
4.Half an hour before the chipper machine stops feeding,stop the two pole vibration and ash discharge,and maintain a high level of dust in the ash hopper.
5.Regularly check the lubricating grease in the oil tank of the High performance press chipper machine and replenish it in a timely manner.
6.Clean the air pump filter of the chipper machine every two weeks to ensure that the air passage is unobstructed.
7.If a fault is found,the machine should be stopped in a timely manner,the cause should be identified,and repair should be carried out.
8.Regularly open the inspection door to check if the filter bag is functioning properly,if there is excessive powder on the surface,and identify the cause to troubleshoot.
9.Add lubricating grease to the air pump bearings of the chipper machine once and replace them once a year.
10.Keep the surface of the pulse controller clean.
Regular maintenance can also check for other issues in the High performance press chipper machine and update it in a timely manner,thereby extending its service life.Therefore,no matter how long the device works,let it rest and maintain it according to the above methods to make it play its due value.