Boutique Straw Pellet Machine

In the context of rapid social development, boutique straw pellet machines, as a common type of wood processing machinery, can be seen everywhere in our daily lives. However, long-term use may cause some problems that may affect the normal operation of the equipment. In this issue, we will learn how to use a straw pellet machine correctly and make it work effectively.

1. Add lubricating grease to the air pump bearings in the equipment once and replace them once a year. Keep the surface of the pulse controller clean.

2. Half an hour before the straw pellet machine stops feeding, stop vibration and ash unloading, and maintain a certain height of dust in the ash hopper.
3. If the large membrane in the pulse valve is damaged or aged, it should be replaced in a timely manner. If a malfunction is found, stop the machine in a timely manner and repair it promptly after identifying the cause.
4. Clean the air pump filter of the straw pellet machine every two weeks to ensure smooth air flow. Then regularly reduce the oil in the fuel tank from the inspection fan and replenish it in a timely manner.
5. Be sure to open the device for inspection. Whether each filter bag is normal and whether there is too much powder on the surface. Find the cause and troubleshoot.
6. After the straw pellet machine equipment stops feeding, the hot air stove continues to supply hot air to the system for 20 minutes to dry the internal parts of the dust collector. Immediately close the inlet and outlet valves of the dust collector after the wind stops to prevent cold air from entering. Maintenance requires a dust collector.
During the use of the straw pellet machine, attention should be paid to its operating status and reasonable maintenance work should be carried out. On the premise of ensuring the quality of use, timely maintenance and regular maintenance inspections are necessary to reduce the risk of equipment use.