Wood crusher factory

How to solve the fault of wood crusher
The wood crusher is mainly used for the chipping and crushing of wood, trunk, branch, straw, bamboo pole, wood block, twig, leaf, bark, bamboo branch, chemical raw materials and other materials, especially in orchards, botanical gardens and landscaping departments, and can crush the built branches, trunk and leaves as fertilizer. The machine can be mounted on a cart or agricultural vehicle and powered by an electric motor, diesel engine or gasoline engine. The wood crusher will also have faults in the process of use, so how to solve it? Today, Xiaobian explained the common faults and solutions of wood crusher.
Fault 1: bearing temperature is too high
Causes:
1. bearing has stolen goods;
2. bearing damage;
3. insufficient butter;
4. the V-belt is too tight;
5. the assembly of bearing seat is unqualified.
Troubleshooting of wood crusher:
1. clean the bearing;
2. replace the bearing;
3. add butter;
4. adjust the belt tightness;
5. replace unqualified parts
Fault 2: production reduction
Causes:
1. the blade is worn;
2. the spindle speed cannot reach;
3. the hammer blade is severely worn.
Exclusion method:
1. timely magic blade;
2. adjust the belt;
3. replace the hammer blade.
Fault 3: severe collective vibration
Causes:
1. feeding is too fast;
2. the screen hole is blocked.
Exclusion method:
1. slow down the feeding speed;
2. stop the machine to clean the screen.
Fault 4: abnormal sound
Causes:
1. there are foreign matters in the wood crusher;
2. the fasteners inside the machine are loose;
Exclusion method:
1. shut down the machine to clean up sundries;
2. stop the machine for inspection and reinforcement.
The above is the common faults and solutions of multifunctional wood crusher summarized by Xiaobian. I hope it will be helpful to you. If you want to know more about wood crusher, you can continue to pay attention to our dynamic updates.