Boutique Wood crusher

Life measurement method of wood crusher

Because the wood crusher is widely used, the maintenance of the equipment is very important. Long term use of the wood crusher will cause damage to the bearing, resulting in a sharp decline in the service life of the equipment. In order to extend its service life, let's understand the method of measuring equipment life.

1. Wear life: refers to the time that the bearing clearance increases to the specified cumulative time due to normal wear. Some bearings with good wear resistance have little wear, and the end of the actual life of the bearing is restricted by the fatigue life.

2. Fatigue life: the cumulative working time before bearing failure due to the fatigue level of the bearing of the wood crusher during operation. Then fatigue is one of the factors determining life. In order to prevent the bearing from being damaged too quickly, try to reduce the excessive use of wood crushing or make it work overload.

3. Failure life: that is, the accumulated working time before losing working ability. If the bearing quality of the wood crusher has nothing to do with the outside world, or the use method is wrong, it will accelerate the damage of the bearing of the wood crusher. The failure rate of bearing will increase if the inner ring of bearing is not properly matched with the shaft, the cage is damaged early, the lubrication is poor or the tooth profile of traction gear is deformed.

The life of boutique Wood crusher can be measured by three methods, including wear life, fatigue life, failure life, etc. I hope that after understanding the above content, it can help you in the future.