China chipper machine manufacturer

It is normal for occasional vibrations to occur during the operation of the chipper machine. If frequent and significant vibrations occur, it is worth our attention. We need to check whether the vibration is caused by problems with the internal components or other aspects of the chipper machine.

At present, China chipper machine manufacturer have summarized the following situations that cause vibration:

1. The shut-off valve is not closed and the manual oil pump handle is in the return position, resulting in no oil in the hydraulic system.
2. The oil pressure filled into the chipper machine cylinder is insufficient, the oil pressure is lower than the air pressure, and the accumulator does not work.
3. Insufficient or excessive nitrogen pressure in the accumulator prevents energy storage and buffering.
4. The hydraulic system operates without oil, and the chipper machine works in an oil-free state.
5. The shut-off valve or cylinder sealing ring is damaged, and the oil pressure cannot be maintained.
6. The one-way throttle valve of the chipper machine is installed in reverse, causing the feeding roller to descend too quickly.
7. The anchor bolts are not tightened.
8. The discharge system is blocked.
The use of chipper machines is very extensive, so any problems found during use should be dealt with and resolved in a timely manner, and the equipment should be regularly maintained and serviced.