Straw Pellet Machine manufacturer

We know that straw pellet machines are equipment used for processing wood chips, and inevitably produce wood chips during the processing. In fact, there are many places inside the equipment that need to be cleaned. In order to ensure the normal operation of internal components, cleaning and maintenance work is sometimes necessary. Follow the straw pellet machine manufacturer to learn about the knowledge of cleaning wood crushing equipment accessories.
1. Ultrasonic cleaning can be used. Under the conditions of chemical cleaning agents and ultrasonic oscillation, the oil stains on the pipe fittings of the straw pellet machine will be removed.
2. The vibration cleaning method is also convenient. Put the parts to be cleaned into the vibration cleaning machine, and then add an appropriate amount of cleaning solution. The cleaning machine vibrates to gradually remove oil stains.
3. Cleaning solution can be directly sprayed onto the surface of the parts to remove oil stains. This method is generally used to clean areas with severe oil stains, and the cleaning effect is much better than soaking in water.
4. It can be used for cooking or washing. Firstly, prepare the necessary solution for cleaning, then place the accessories to be cleaned into a cleaning tank, heat them to around 80 degrees Celsius, boil and clean for 3-5 minutes to clean and disinfect the accessories.
5. You can directly wipe it, put the accessories into a container containing diesel and kerosene, and then clean it with cotton yarn. This method is relatively simple to operate, but it is not suitable for large-scale processing, otherwise more manpower is required.
We should not ignore the issue of cleaning when using a straw pellet machine. If it is not cleaned for a long time, it will greatly affect our production efficiency. The above is an introduction to the cleaning methods for straw pellet machine accessories, hoping to be helpful for you when using this equipment.