China disc wood chip machine manufacturer

The emergence of mechanical equipment greatly liberated our labor force.However,due to different professions,the requirements for disc wood chip machines are also very different.Different professions have different requirements for the thickness and fineness of wood crushers.How can we improve the operational efficiency of mechanical equipment and enhance the quality of wood chips by adjusting the distance between the flying knife and the bottom knife according to demand?Below,China disc wood chip machine manufacturer will talk about this issue,hoping it will be helpful to us.

1.According to the different materials,in general,the chipper can cut small diameter wood,veneer,Flat noodles,etc.Below 120mm,and the cut wood chips can be used as materials for fiberboard and pulp.

2.Too thick(greater than 350mm),too thin(less than 30mm),too short(less than 250mm),too thin(less than 5mm),and irregular materials(undifferentiated tree stumps,branches,etc.)Insufficient,the disc wood chip machine has the function of uniform cutting.
3.According to the purpose of sawdust,paper mills usually do not have specific requirements for the size of processed sawdust,but in Guangxi,the thickness of sawdust is 0.3-05 centimeters,the length is 2-5 centimeters,and the width is 3-8 centimeters.Regardless of the type of log,it needs to be peeled,which means that the wood can only be processed into wooden pieces using woodworking machinery after being peeled.
Then there is the wear and tear of the bottom blade,and the number of cutting edges on the bottom blade of the disc wood chip machine varies depending on the type.Usually we have six cutting edges,which will wear out after long-term use and require sharpening.This time,we need to add coolant to ensure the grinding stability of the slicer.Generally speaking,we also need to do a good job in equipment maintenance to greatly ensure the service life of the equipment.