Wood crusher price

Question: how to clean and maintain the accessories of wood crusher
We know that the wood crusher is used to process wood chips, which will inevitably produce wood chips in the processing process. In fact, there are many places inside the equipment that need to be cleaned. In order to keep the internal accessories in normal operation, it is sometimes necessary to carry out cleaning and maintenance work. Let's take a look at the knowledge of cleaning wood crushing equipment accessories.
1. Ultrasonic cleaning can be used. Under the conditions of chemical cleaning agent and ultrasonic vibration, the oil stains on the pipe fittings of the wood crusher will be removed.
2. Vibration cleaning method is also convenient. Put the parts to be cleaned into the vibration cleaning machine, and then add an appropriate amount of cleaning liquid. The cleaning machine vibrates to gradually remove oil stains.
3. The cleaning fluid can be directly sprayed on the surface of parts to remove oil stains. Generally, it is necessary to use this method to clean the parts with serious oil stains, and the cleaning effect is much better than that of water immersion.
4. It can be boiled or washed. First, prepare the solution required for cleaning, then put the accessories to be cleaned into the cleaning tank, heat it to about 80 ℃, boil it for cleaning for 3-5 minutes, and then clean and disinfect the accessories.
5. It can be scrubbed directly. The accessories are put into a container containing diesel oil and kerosene, and then scrubbed with cotton yarn. This method is relatively simple to operate, but it is not suitable for large-scale processing, otherwise more manpower is required.
We should not ignore the cleaning problem when using the wood crusher. If we do not clean it for a long time, it will greatly affect our production efficiency. The above is an introduction to the cleaning methods of wood crusher accessories. I hope it will be helpful for you to use this equipment.